Lenovo ThinkStation Hardware Maintenance Manual page 72

Message/Symptom
Incorrect memory size during POST
"Insert a Diskette" icon appears with a known-good
diagnostics diskette in the first 3.5-inch diskette drive.
Intensity or color varies from left to right of characters
and color bars
No power or fan not running
Non-system disk or disk error-type message with a
known-good diagnostic diskette.
Other display symptoms not listed above (including blank
or illegible display)
Turn on indicator or hard disk drive in-use light not on, but
computer works correctly
Printer problems
Program loads from the hard disk with a known-good
diagnostics diskette in the first 3.5-inch diskette drive
RPL computer cannot access programs from its own hard
disk.
RPL computer does not RPL from server
Serial or parallel port device failure (system board port)
66
ThinkStation Hardware Maintenance Manual
FRU/Action
1. Run the Memory tests.
2. Memory Module
3. System Board
1. System Board
2. Diskette Drive Cable
3. Network Adapter
1. Display
2. Video adapter (if present)
3. System Board
1. See "Hard disk drive boot error" on page 45.
1. Diskette Drive
2. System Board
3. Diskette Drive Cable
1. Display
2. System Board
1. Power switch/LED assembly
2. System Board
1. Printer
2. System Board
1. Run the Setup Utility program and check Startup
sequence.
2. Diskette Drive
3. Diskette Drive Cable
4. System Board
5. Power Supply
1. If network administrator is using LCCM Hybrid RPL,
check startup sequence:
a. First device - network
b. Second device - hard disk
2. Hard disk drive
1. Check startup sequence.
2. Check the network adapter LED status.
1. External Device Self-Test OK?
2. External Device
3. Cable
4. System Board