Main Menu
Table of Contents
Replacing a Rear License Bulb
1. Use a Phillips-head screwdriver to
loosen the two screws holding the
license plate light assembl y to the
bracket. Slide the assembl y out
from the bracket.
2. Remove the socket from the light
assembl y by turning it one-quarter
turn counterclockwise .
3. Pull the bulb straight out of its
socket. Push the new bulb in until
it bottoms in the socket.
4. Turn on the parking lights and
check that the new bulb is
working.
5. Put the license light assembl y in
place. Tighten the two screws
securely.
Maintenance
Lights