Honda Accord Coupe 2000 Owner's Manual page 264

Main Menu
Table of Contents
4. Remove the socket by turning it
one-quarter turn counterclockwise .
5. Pull the bulb straight out of its
socket.
Push the new bulb straight into
the socket until it bottoms.
6. Reinstall the socket into the light
assembly.
7. Test the lights to make sure the
new bulb is working.
8. Reinstall the plastic cover and
secure it with the screw.
Replacing a Rear Side Marker
Light Bulb
SCREW
1. Use a Phillips-head screwdriver to
loosen the side marker assembly
mounting screw.
2. Remove the assembly from the
fender by pulling out the back
edge and sliding the assembly
backwards.
3. Remove the socket from the light
assembl y by turning it counter-
clockwise.
4. Remove the bulb from the socket
by pulling it straight out.
Install the new bulb. Turn on the
headlights to test the bulb.
Maintenance
Lights
CONTINUED