Honda Accord Coupe 2000 Owner's Manual page 259

Main Menu
Table of Contents
Lights
4-cylinder models
1. Open the hood.
4-cylinder models
If you need to change the head-
light bulb on the passenger' s side,
remove the radiator reserve tank
and the air intake duct.
6-cylinder models
If you need to change the
headlight bulb on the driver's side,
remove the radiator reserve tank.
Maintenance
AIR INTAKE
DUCT
2. Remove the electrical connector
from the bulb by squeezing the
connector to unlock the tab, then
slide the connector off the bulb.
3. Remove the bulb by turning it
approximatel y one-quarter turn
counterclockwise .
4. Insert the new bulb into the hole
and turn it one-quarter turn clock-
wise to lock it in place.
5. Push the electrical connector back
BULB
onto the bulb. Make sure it is on
all the way.
6. Turn on the headlights to test the
new bulb.
7. 4-cylinder models
(Passenger' s side)
Reinstall the radiator reserve tank
and the air intake duct.
TAB
6-cylinder models
(Driver's side)
Reinstall the radiator reserve tank.