Honda TSX 2006 Owner's Manual page 145

RELEASE LOOP
To release the seat-back from inside
the trunk, pull the release loop under
the trunk panel.
Push the seat-back down, then let go
of the release.
To lock the seat-back upright, push it
firmly against the trunk panel. Make
sure it is latched in place by pulling
on the top of the seat.
Make sure that the folded seat-back
does not interfere with the front
passenger's seat-back. This will
cause the front passenger's weight
sensors to work improperly (see
page 30 ). Also check the passenger
airbag off indicator to assure proper
operation of the passenger's
advanced front airbag.
Make sure all rear shoulder belts are
positioned in front of the rear seat-
back, and the center shoulder belt is
re-positioned in the guide whenever
the seat-back is in its upright position.
Be sure there are no twists in the
center shoulder belt.
Do not put any heavy items on the
seat-back when it is folded.
Make sure all items in the trunk, or
items extending through the opening
into the back seat, are secured.
Loose items can fly forward and
cause injury if you have to brake
hard. See Carrying Cargo
236 .
Never drive with the seat-back
folded down and the trunk lid open.
See Carbon Monoxide Hazard
page 56 .
Seats
on page
on
141