Daytime Running Lights, Instrument Panel Brightness
The headlights revert to normal
operation when you turn them on
with the switch.
If you see a ''CHECK DRL
SYSTEM'' message in the multi-
information display, there is a
problem in the high beam headlight's
circuit. Take your vehicle to a dealer
to have it checked.
When the multi-information display
shows a ''DRL OFF'' message, the
daytime running lights are off.
Follow the procedure in the previous
page to turn them on.
122
Instrument Panel Brightness
SELECT/RESET KNOB
The knob on the instrument panel
controls the brightness of the instru-
ment panel lights. Turn the knob to
adjust the brightness.
U.S. model is shown
BRIGHTNESS LEVEL
The level of brightness is shown in
the multi-information display while
you adjust it. It goes out 5 seconds
after you finish adjusting.
To reduce glare at night, the instru-
ment panel illumination dims when
you turn the light switch to
. Turning the Select/Reset
knob fully to the right until you hear
a click will cancel the reduced bright-
ness.
or