Honda TSX 2006 Owner's Manual page 136

Remote Transmitter
When you open the driver's door
after unlocking it with the remote
transmitter, you will hear a beep
(depending on the ''KEYLESS
LOCK ACKNOWLEDGEMENT''
setting see page 112 ). The driver's
seat move to the positions stored in
that memory location. You will hear
two beeps when the movement is
completed.
To stop the system's automatic
adjustment, do any of these actions:
Press any button on the driver's
door: MEMO, memory button 1 or
2.
Push any of the adjustment
switches for the seat.
Shift out of Park (A/T).
132
The driving position memory
activated (Driver 1, Driver 2) is
shown on the back of each
transmitter. Make sure you store
your desired driving position in the
memory that is activated by the
transmitter you normally carry.
You can turn off this system
activation. Press and hold the LOCK
and UNLOCK buttons at the same
time. The LED in the remote
transmitter will blink twice. Then
release the buttons. Doing this also
cancels the ''MEMORY POSITION
LINK'' setting for that remote and
restores the default settings.
To turn it back on, repeat this
procedure. The LED will come on
for 1 second to indicate the feature
has been turned on.
Remote Transmitter Care
Avoid dropping or throwing the
transmitter.
Protect the transmitter from
extreme temperature.
Do not immerse the transmitter in
any liquid.
If you lose a transmitter, the
replacement needs to be
reprogrammed by your dealer.