HP ProLiant DL360p Quickspecs page 55

QuickSpecs
Technical Specifications
HP Smart Array P420i HP Smart Array P420i HP Smart Array P420i HP Smart Array P420i
Controller Controller Controller Controller
Driver Support Driver Support Driver Support Driver Support
Management protocols Management protocols Management protocols Management protocols
supported supported supported supported
Dimensions Dimensions Dimensions Dimensions
Disk Drive and Enclosure Disk Drive and Enclosure Disk Drive and Enclosure Disk Drive and Enclosure
Interface - Transfer rate Interface - Transfer rate Interface - Transfer rate Interface - Transfer rate
SAS Connectors SAS Connectors SAS Connectors SAS Connectors
Cache Memory Speed Cache Memory Speed Cache Memory Speed Cache Memory Speed
Server Interface Server Interface Server Interface Server Interface
SAS Speed SAS Speed SAS Speed SAS Speed
Cache Memory Cache Memory Cache Memory Cache Memory
Logical Drives Supported Logical Drives Supported Logical Drives Supported Zero Memory, Up to 2 logical volumes (8SFF or 4LFF physical drives) Logical Drives Supported
Host Memory Addressing 64-bit, supporting greater than 4GB server memory space Host Memory Addressing Host Memory Addressing Host Memory Addressing
RAID Support RAID Support RAID Support RAID Support
DA - 14211 North America — Version 5 — April 19, 2012
HP ProLiant DL360p Generation 8 (Gen8) HP ProLiant DL360p Generation 8 (Gen8) HP ProLiant DL360p Generation 8 (Gen8) HP ProLiant DL360p Generation 8 (Gen8)
HP ProLiant iLO 4 Management Controller Driver Package
SNMP, IPMI 2.0 (system and LAN interface), DMTF Systems Management
Architecture for Server Hardware Command Line Protocol (SMASH CLP), HP
RIBCL XML
Embedded
6Gb/s SAS (Serial Attached SCSI)
6Gb/s SATA (Serial ATA)
2 internal 4X connectors
512MB FBWC - DDR3-1333MHz with 40-bit wide bus, 1GB or 2 GB FBWC
DDR3-1333MHz with 72-bit wide bus
x8 PCIe 3.0 provides 2GB/s maximum bandwidth
8 6Gb/s SAS links provide 4.8GB/s maximum bandwidth
Zero Memory RAID has no cache memory
40-bit 512MB ECC protected flash back write cache
72-bit 1GB FBWC or 72-bit 2GB FBWC
Up to 64 logical drives with cache
RAID 6, 6+0 (Advanced Data Guarding)
NOTE: RAID 6, 6+0 can be enabled with one of the following NOTE: NOTE: NOTE:
combinations:
512 MB FBWC and Smart Array Advanced Pack License key option
upgrades
1G or 2GB FBWC and Smart Array Advanced Pack License key option
upgrades
RAID 5, 5+0 (Distributed Data Guarding)
NOTE: NOTE: NOTE: A minimum or 512 MB cache is required to enable RAID 5, 5+0 NOTE:
support
RAID 1+0 (Striping & Mirroring)
RAID 0 (Striping), RAID 1 (Mirroring)
Page 55