Table of Contents
Advertisement
Raven XT
24
Note: Until you install a driver for the USB port, you cannot use your USB port to configure
the modem.
•
Power adapter and a power source - You will need a power supply and
power source for the modem.
•
PC or laptop - To configure the modem, you will need a computer with an
available serial port.
Tools Required
•
Small Phillips screw driver - The Phillips screw driver is the one which is
also called a plus (+) or X screw driver.
Procedure
a. Carefully remove the SIM card from the card you received from AT&T.
Figure 0-1: Sample of the SIM card
b. Gently press the SIM card to secure in place.
Figure 0-2: Insert SIM in to the modem
c. Replace the case back.
Tip:
The top of the card faces the bottom of the modem.
When the faceplate is replaced and secured, the installation of the SIM is
complete.
20070914
Advertisement
Table of Contents
