Projected Capacitive Technology - HP L6015tm User Manual

Table B-2 HP L6017tm Specifications (continued)
Operating Conditions
Temperature (Operating)
Temperature (Storage)
Humidity
Altitude
Dimensions
Width
Height (with stand)
Height (without stand)
Depth (with stand)
Depth (without stand)
Weight
Actual (unpacked, with stand)
Actual (unpacked, without stand)
Shipping (packaged without stand)

Projected Capacitive Technology

Table B-3 Projected Capacitive Specifications
Input Method
Positional Accuracy
Resolution Accuracy
Touch Activation Force
Surface Durability
Expected Life Performance
Optical Light Transmission
(per ASTM D1003)
Electrostatic Protection (per
EN 61 000-4-2, 1995)
5°C to 40°C (41°F to 104°F)
-20°C to 60°C (-4°F to 140°F)
20% ~ 80% (No Condensation)
0 to 5000 meters (16,400 feet)
385.58 mm
423.31 mm
338.90 mm
283.39 mm
58.00 mm
7.5 kg
4.7 kg
6.5 kg
Bare finger, 3 layers of food service gloves, 3M SmartPen stylus
Standard deviation of error is less than 0.080 in (2.03 mm). Equates to less than ±1% error
on most displays.
More than 100,000 touchpoints/in² (15,500 touchpoints/cm²) for a 15-inch touch screen.
The controller firmware program may reduce resolution to accommodate axis length
greater than 465 mm.
Typically less than 3 ounces (85 grams).
Surface scratches will not cause functional failures regardless of the length or depth of the
scratch. A Mohs' pick with a hardness rating of 6 or higher is required to induce a cosmetic
scratch.
No known wear-out mechanism, as there are no layers, coatings, or moving parts.
Technology has been operationally tested to more than 50 million touches in one location
without failure, using a stylus similar to a finger.
>87%
Meets Level 4 (15 kV air/8j V contact discharges).
15.18 in
16.67 in
13.34 in
11.16 in
2.28 in
16.53 lb
10.36 lb
14.33 lb
Projected Capacitive Technology 27