Bosch NDN-498 Brochure & Specs page 6

6 | NDN-498 FlexiDome2X Day/Night IP Cameras
Sensitivity (3200 K, scene reflectivity 89%)
Full video
(100 IRE)
NDN-498V03 (F1.2)
Color 2.48 lx
(0.23 fc)
Color 0.248 lx
+ SensUp 10x (0.023 fc)
Monochrome 1.01 lx
(0.093 fc)
Monochrome 0.1 lx
+ SensUp 10x (0.0093 fc)
NDN-498V09 (F1.4)
Color 2.7 lx
(0.26 fc)
Color 0.27 lx
+ SensUp 10x (0.026 fc)
Monochrome 1.1 lx
(0.090 fc)
Monochrome 0.11 lx
+ SensUp 10x (0.01 fc)
Day/Night Color, Mono, Auto
Modes 6 preset programmable modes
Dynamic range 120 dB (20-bit image processing)
Signal-to-Noise Ratio >50 dB
Dynamic engine 2X-Dynamic, XF-Dynamic, SmartBLC+2X-Dy-
namic
SmartBLC On (includes 2X-Dynamic ) / Off
AGC AGC On or Off (0 - 30 dB) selectable
White Balance ATW, ATWhold and manual (2500 to 10000K)
Shutter Auto (1/50 [1/60] to 1/10000) selectable
Auto (1/50 [1/60] to 1/50000) automatic
flickerless, fixed selectable
Sensitivity up Adjustable from Off up to 10x
Auto Black Automatic continuous, Off
Dynamic Noise Reduction Auto, On/off selectable
Sharpness Sharpness enhancement level selectable
Peak White Invert On/Off
Privacy Masking Four independent areas, fully programmable
Video Motion Analysis Motion+ or IVA
Test Pattern Generator Color bars 100%, Grayscale 11-step, Saw-
tooth 2H, Checker board, Cross hatch, UV
plane
Synchronization Internal, Line Lock, HV-lock and Genlock
(Burst lock) selectable
Controls OSD with soft-key operation (multi-lingual)
Audio
Standard G.711 300 Hz to 3.4 kHz at 8 kHz sampling rate
Signal-to-noise ratio > 50 dB
Usable picture Minimum illumi-
(50 IRE) nation (30 IRE)
0.621 lx 0.28 lx
(0.058 fc) (0.027 fc)
0.062 lx 0.028 lx
(0.0058 fc) (0.0027 fc)
0.23 lx 0.099 lx
(0.021 fc) (0.0092 fc)
0.023 lx 0.0099 lx
(0.0021 fc) (0.00092 fc)
0.69 lx 0.321 lx
(0.064 fc) (0.03 fc)
0.069 lx 0.032 lx
(0.0064 fc) (0.003 fc)
0.27 lx 0.11 lx
(0.026 fc) (0.01 fc)
0.027 lx 0.011 lx
(0.0026 fc) (0.001fc)
Input/output
Audio 1 x mono line in, 1 x mono line out
•
signal line in 9 kohm typical, 5.5 Vpp max
•
signal line out 3.0 Vpp at 10 kOhm typical,
2.3 Vpp at 32 Ohm typical,
1.7 Vpp at 16 Ohm typical
Alarm 1 non-isolated closing contact
•
activation voltage +5 VDC to +40 VDC
(+3.3 VDC with DC-coupled 22 kOhm pull-up
resistor)
Relay 1 output
•
voltage 30 VAC or +40 VDC
Maximum 0.5 A continuous, 10VA
Software Control
Unit Configuration Via web browser or Configuration Manager
Flicker Control 50/60 Hz, selectable
Software update Flash ROM, remote programmable
Network
Protocols RTP, Telnet, UDP, TCP, IP, HTTP, HTTPS,
FTP, DHCP, IGMP V2/V3, ICMP, ARP, SMTP,
SNTP, SNMP, 802.1x, UPnP
Encryption TLS 1.0, SSL, AES (optional)
Ethernet STP, 10/100 Base-T, auto-sensing, half/full
duplex, RJ45
PoE SUPPLY IEEE 802.3af compliant
Optical
Varifocal lens IR corrected, manual zoom and focus adjust-
ment
Iris control Automatic iris control
Viewing angle
2.8 to 10 mm Wide 100.8 x 73.7º (H x V)
Tele 28.5º x 21.4º (H x V)
9 to 22 mm Wide: 31.2º x 22.8º (H x V)
Tele: 12.8º x 9.6º (H x V )
Mechanical
Weight 0.67 kg (1.48 lb)
+SMB: 1.29 kg (2.84 lb)
Mounting Flush mount or surface mount
Color White (RAL9010) trim ring with black inner
liner
Adjustment range 360º pan, 90º tilt, ±90º azimuth
Dome bubble Polycarbonate, clear with UV blocking anti-
scratch coating
Trim ring Aluminum