Pioneer AVX-P7700WES Service Manual page 71

- Removing the X-PCB
1. Release three catches on the frame.
2. Pull out the pins from frame holes and remove the X-
PCB.
Pin
Catch
Pin
Catch
X-PCB
- Removing the Cell
1. Remove the cell from the backlight picking up the
periphery.
Catch
Pin
Cell
- Precautions
1. Three frame catches hold the end faces of the PCB.
2. Do not catch the PCB aslant to prevent the TAB from
being stressed.
3. The frame pins shall be set in the PCB positioning
holes at three places.
Setting of shielding case
Catch engaging points
AVX-P7700W
71