Power Saving Function - HP mx703 Service Manual

2-4 Power Saving Function

Note: The monitor will be driven into "Power Saving" mode by the control signal from the display
controller, as indicated by the amber-color power LED.
The power saving states will be kept until a control signal has been detected or the keyboard or mouse is
activated. The recovery time from Active OFF state back to ON state is around 10 seconds.
* For power consumption : 75W Max. (@ 230V AC, preset size and maximum light output condition)
2-5 TCO Version (Optional)
The monitor meets the TCO 99, NUTEK energy saving, electric and magnetic field requirements. Also it
is compliant with TCO 99 labelling scheme.
The emission from magnetic and electric field must comply with the limits specified by the Swedish Board
for Measurement and Testing, commonly known as MPR 1990 recommendations. These limits are sum-
marized in the Table 2-4.
Magnetic Field
Electric Field
Frequency Range
Value
Distance
Electrostatic
P o t e n t i a l
The monitor is designed with selected CRT and carefully routed wires around CRT, make sure exactly the
Page 8
Table 2-3. Power Saving Function
State Power
Consumption
ON Normal
Active
<2 watts
OFF
Table 2-4. TCO 95 Emission Requirements
VLF/TCO
2 5 n T
1 V / m
2 ~ 4 0 0 k H z
R M S
3 0 c m
+ / - 5 0 0 V
LE
D
Light
Blue
*
Amber
ELF/TCO
2 0 0 n T
1 0 V / m
5 ~ 2 0 0 0 H z
R M S
3 0 c m
+ / - 5 0 0 V
HP mx703/m703