Horizon Fitness EX-67 User Manual page 8

ASS E MB LY ST EP 
CONSOLE
NOTE: There is NO hardware bag for this step. All hardware is pre-installed.
A) Attach the CONSOLE MAST wires to the CONSOLE wires .
B) Carefully tuck the CONSOLE MAST wires into the CONSOLE MAST before attaching the CONSOLE.
C) Attach CONSOLE to the CONSOLE MAST using the 4 PRE-ATTACHED SCREWS (screws will have to be removed
from the console first).
DO NOT PINCH WIRES!
Connect AC ADAPTOR to the AC ADAPTOR INPUT, located at front of the main frame. Connect
ADAPTOR to a power outlet. Locate the ON / OFF switch on the back of the CONSOLE. Flip the switch
to the ON position. After a "beep", the CONSOLE will turn on.
1
EX-67_Rev.1.6.indd 14-15
CONSOLE WIRES
PRE-ATTACHED
SCREWS
YOU'RE FI NISHED!
1
7/7/08 4:29:24 PM