Touch Panel Operation Overview - Panasonic CQ-VD5505W Operating Instructions Manual

Touch Panel Operation Overview

❒ Notes on the Touch Panel
Before operation
¡Clean the surface of the touch panel.
Operation
11
¡Use only your fingers to operate the touch panel.
¡Do not press the panel forcefully.
¡Do not scratch the panel with fingernails or any
hard objects.
Example: DVD mode
Note :
¡The following picture is partly darkened for explanation.
¡Displaying contents and their positions partly vary with each mode. Refer to the description of each mode for details.
Aspect Button (a page 34)
(only for video source)
Source Button
(Content varies with each
source)
Displays the Source Selection Screen.
Source Selection Screen
Source Selection Screen appears.
Touch desired source button.
Touch to quit.
Press [SRC/PWR] to change to
desired source.
Note :
¡The screen above appears when no external
device is connected to AV1, AV2.
12
CQ-VD5505W
(a page 43)
The State of Operation Screen
Current
Disc indicator
mode
(Lights when a disc is loaded)
Displays the Setup Screen.
Setup Screen appears. Select desired setting.
Setup menu,
¡Do not use a pen or other sharp implements to
operate the touch panel.
¡Do not bump the front panel.
a
Failure to observe the above may damage or
break the glass on the surface of the touch
panel.
(a page 17)
Prohibition
Input is not possible because the user has
attempted to perform an operation which
is not supported by the disc contents.
Clock time
Setup Button
Setup Screen
(a page 30)
Press [SETUP] to let Setup
Screen appear.
(a page 32)