Touch Panel Operation Overview - Panasonic CQ-VW220W Operating Instructions Manual

Touch Panel Operation Overview

❒ Notes on the Touch Panel
Before operation
¡Clean the surface of the touch panel.
Operation
11
¡Use only your fingers to operate the touch panel.
¡Do not press the panel forcefully.
¡Do not scratch the panel with fingernails or any
hard objects.
Example: DVD mode
Note :
¡The following picture is partly darkened for explanation.
¡Displaying contents and their positions partly vary with each mode. Refer to the description of each mode for details.
Aspect Button
(a page 36)
(only for video source)
Sound Button
(a page 37)
Displays the Source Selection Screen.
Source Selection Screen
Source Selection Screen appears.
Touch desired source button.
Touch to quit.
Press [SRC/PWR]/[SRC] to change to desired
mode.
Note :
¡The screen above appears when no external device is
connected to this unit.
12
CQ-VW220W
(a page 47)
The State of Operation Screen
Source Button
(Content varies with each source)
¡Do not use a pen or other sharp implements to
operate the touch panel.
¡Do not bump the front panel.
a
Failure to observe the above may damage or
break the glass on the surface of the touch
panel.
Disc indicator
(Lights when a disc is loaded)
Setup Button
Displays the Setup Screen.
Setup Screen
Setup Screen appears. Select desired setting.
Setup menu, (a page 32)
Clock time
(a page 34)
Prohibition
Input is not possible
because the user has
attempted to perform
an operation which is
not supported by the
disc contents.
(a page 17)