Av1/Av2 - Panasonic CQ-VD7003W2 Operating Instructions Manual

AV1/AV2

Please refer to the separate "System Upgrade Guidebook" for how to operate this unit when optional devices are
connected.
Preparation:
25
¡Connect an optional external device to the AV1/AV2.
AV Mode Selection
You can view the images and listen to the sounds from
the connected external devices in the AV1/AV2 mode
respectively.
q Touch "Source Button".
d
Press [SRC] to change to the desired
mode.
To switch Operation Screen ON, touch the center of
touch panel or press [ENTER].
Note:
¡You can set up the system so that the AV mode is not
selected (source skip).
INPUT is not skipped even if
)
ON
¡If no operation is performed for 10 seconds or
touched, the operation buttons disappear.
¡AV terminal is not used for the Panasonic car
navigation system (available in the future). Refer to
for setting.
NAVI SETUP
Guidebook)
26
CQ-VD7003W
w Touch
/
(AV1/AV2) on the
Source Selection
Screen.
(a page 37) (AV set to NAVI
is set to
SOURCE SKIP
(a System Upgrade
Source Button
ASPECT
ASP
P·MODE
VOL
PWR
MUTE SRC SRC
[SRC]
is
TILT CLOSE
OPEN / CLOSE
CQ-VD7003W TILT O / C
TEXT
CQ-VD7001U
ENTER ENTER
MENU NAVI
[ENTER]