Tune To A Radio Station; Store Radio Stations In Memory; Tune To A Preset Radio Station - Philips CED1900BT User Manual

2
Tap [Distance] or [Local] to select a tuner sensitivity.
•
[Distance]: Stations with strong and weak signals
can be tuned to.
•
[Local]: Only stations with strong signals can be
tuned to.
Enable the RDS feature
Note
•
RDS feature is enabled by default.
•
Only after the RDS feature is enabled, the option of
[PTY list] is displayed.
Tap [RDS Off] (RDS disabled) to enable the RDS feature.
The option of [PTY list]is displayed.
»
•
To disable the RDS feature, tap [RDS On] (RDS
enabled).

Tune to a radio station

1
Tap FM or AM to select a band.
•
FM bands: FM1, FM2, FM3
•
AM bands: AM1, AM2
2
Tap or repeatedly until the frequency of target
radio station is displayed.
•
To tune to a radio station automatically, tap and
hold or until the frequency digits start
change.
Tip
•
You can also press BAND on the remote control
repeatedly to select a band.

Store radio stations in memory

You can store up to 6 stations in each band.
Store radio stations manually
1
Select a band.
2
Tune to the target radio station.
3
Tap and hold one of the channels (1 to 6) over two
seconds.
» The radio station is saved under the selected
channel.
Store radio stations automatically
You can search for a radio station with intro search, which
broadcasts a 10-second preview of each detected radio
station.
1
Select a band.
2
Tap .
3
Tap [Auto Store].
» Auto search starts. The six strongest stations of
the selected band are saved in preset channels
automatically.

Tune to a preset radio station

1
Select a band.
2
Tap one of the preset channels (1 to 6) to select a
preset radio station.
EN 13