Sanyo PLC-XU106 Owner's Manual page 53

On start
When this function is set to On, the projector will be
automatically turned on just by connecting the AC power
cord to a wall outlet.
Note:
Be sure to turn off the projector properly (see "Turning
Off the Projector" on page 21). If the projector is turned
off in the incorrect sequence, the On start function does
not work properly.
Closed Caption
Closed Caption is a printed version of the program sound or
other information displayed on the screen. If the input signal
contains closed captions, you can turn on the feature and
switch the channels. Press the Point
Off, CC1, CC2, CC3 or CC4.
If the closed caption is not clear, you can change the text
from Color to White.
Note:
The Closed Caption is available only under the situation
below.
• When the input signal is NTSC of composite and
S-video, and the system is set according to the signal
or set on Auto.
• The system must be set on NTSC or Auto in Video
System Selection. (p.41)
• The item of Closed Caption is displayed in gray while it
is not available.
• The Closed caption is unavailable when On-Screen
Menu and P-Timer are displayed.
Standby mode
This function is available when operating the projector via
network.
Network .... Supply the power to the network function even
after turning off the projector. You can turn on/
off the projector via network, modify network
environment, and receive an e-mail about
projector status while the projector is powered
off.
Eco............ Select Eco when you do not use the projector
via network. The projector's network function
will stop when turning off the projector.
Refer to the owner's manual of "Network Set-up and
Operation".
Note:
• Factory default is Network.
• When selecting Network, the cooling fans may be
running depending on the temperature inside the
projector even if the projector is turned off.
Closed Caption
buttons to select
Language
Menu position
Auto setup
Keystone
Background
Display
Logo
Ceiling
Rear
Power management
On start
Closed caption
Standby mode
Press the Point buttons to
select Off, CC1, CC2, CC3 or CC4,
and then Press Select button.
Setting
English
Blue
On
On
On
Off
Off
more...
Eco
1/2
53