Canon VIXIA HFM40 Quick Manual page 35

Quick Start Function
o
IMPORTANT
• Do not disconnect the power source during standby mode (while the ONI
OFF (CHG) indicator is lit in orange).
CD
NOTES
• If you close the LCD panel under some circumstances (for example while
the memory card slot cover is open or when the battery charge is too low),
the camcorder may not enter the standby mode. Check that the indicator
changes to orange
0
• The camcorder will power off automatically if left in standby mode for 10
minutes. In that case, press
[POWER]
to turn on the camcorder. You can
select the length of time until shut-off or turn off the Quick Start function.
See [Power Saving Madej (
~
PDF)
159) for details.
• You can use the Quick Start function in the same manner also in
1111
or
IfjfMAJ
mode.
35