Canon VIXIA HFM40 Quick Manual page 102

Using the Touch Screen's Zoom Controls
1 Display the zoom controls on the touch screen.
[FUNC.]
• The zoom controls appear on the left side of the screen.
2 Touch the zoom controls to operate
the zoom.
Touch anywhere within the Q area to
zoom out or anywhere within the P area
to zoom in. Touch closer to the center for
a slow zoom; touch closer to the e/d
icons for faster zooms.
3 Touch [a] to hide the zoom controls.
NOTES
• Keep at least 1 m (3.3 ft.) away from the subject. At full wide angle, you
can focus on a subject as close as 1 cm (0.39 in.). Using tele macro
(0 101), you can focus on a subject as close as 40 cm (1.3 ft.) at full
telephoto.
• In or
one of three constant speeds (3 is the fastest, 1 the slowest).
• When [Zoom Speed] is set to [I Variable]:
- When you use the P and Q buttons on the wireless controller, the
zoom speed will be constant at [J Speed 3].
- The zoom speed will be faster in record pause mode than when
actually recording, except when pre-recording (0 92) is activated.
Specifications
• See
recording program is set to [r Underwater] or [s Surface].
Š
52
AUTO Mode
8
[ZOOM]
mode, you can also set 7
(0 196) for notes about this function when the
8
[Zoom Speed] to