Panasonic NE-C1153 Service Manual page 18

NE-C1153 / NE-C1153C
8.4. Door assembly
1. Remove 2 screws holding the upper hinge to the oven.
2. Open the door and while pulling the door toward you, work
the upper hinge out through the hole in the oven.
3. Remove 4 screws holding the door C.
4. Remove the door C by carefully pulling outward starting
from the upper right hand corner.
5. Remove 2 screws holding door E.
6. Separate the door A from door E by carefully freeing catch
hooks on door A while pulling outward.
7. Remove the door key spring and the door key.
8. Remove 2 screws holding door handle.
9. When mounting the door to the oven, be sure to adjust the
door parallel to the bottom line of the oven face plate by
moving the upper hinge and lower hinge in the direction
necessary for proper alignment.
Also adjust so that the door has no play between the inner
door surface and oven frame. If the door is not mounted
properly, microwave energy may leak from the clearance
between the door and the oven.
8.5. Antenna motor
1. To remove the antenna motor, carefully place the unit on its
left side.
2. Remove 2 screws holding motor cover.
3. Remove 2 screws holding antenna motor.
18