Confirm After Repair - Panasonic NE-C1153 Service Manual

NE-C1153 / NE-C1153C
7.4. When parts must be replaced,
remove the power plug from
the outlet.
1. High voltage (above 250 volts) exists at following parts during
oven operation.
· Magnetron
· High Voltage Transformer
· High Voltage Diode
· High Voltage Capacitor
2. If the microwave oven is operated with incorrect installed door
hinge or magnetron, it can cause microwave leakage of over
5mW/square centimeter.
Hence it is absolutely necessary to check if magnetron and door
hinge are correctly and safety installed after repairs or
replacement.
Important Note
7.5. When the 15 Amp. fuse is
blown due to the operation of
interlock monitor, replace the
necessary components
according to the following
table.
7.6.

Confirm after repair

1. After repair or replacement of parts, make sure that the
screws of the oven, etc. are neither loose nor missing.
Microwave might leak if screws are not properly tightened.
2. Make sure that all electrical connections are tight before
inserting the plug into the wall outlet.
7.7. Avoid inserting nails, wire, etc.
through holes in unit during
operation.
Never insert a wire, nail or any other metal object through the
lamp holes on the cavity or any other holes or gaps, because
such objects may work as an antenna and cause microwave
leakage.
16