Access Control; Wps - Sapido BRF71n User Manual

5.4.4

Access Control

Please refer Wireless Access Control
5.4.5

WPS

This page allows user to change the setting for WPS (Wi-Fi Protected Setup). Using this
feature could let your wireless client atomically synchronize it's setting and connect to the
Access Point in a minute without any hassle. SAPIDO BRF71N could support both Self-PIN
or PBC modes, or use the WPS button (at real panel) to easy enable the WPS function.
PIN model, in which a PIN has to be taken either from a sticker label or from the web
interface of the WPS device. This PIN will then be entered in the AP or client WPS device to
connect.
PBC model, in which the user simply has to push a button, either an actual or a virtual one,
on both WPS devices to connect.
BRF71n WPS only support no encryption and WPA2
Please follow instructions below to enable the WPS function.
1. Setup Wireless LAN with WPS PIN :
(1). Get the WPS PIN number from wireless card and write it down.
http://www.sapido.com.tw/
" P as s ph ras e
72
User Manual v1. 0.0