Handle Positions; On-Off Power - Hoover U3721 Owner's Manual

Your cleaner also has a conve-
nient carrying handle located just
above the tool cover.

Handle positions

The handle of your cleaner has
three positions: upright for
storage and tool use; operating
for general operation on carpet
and floors; low for cleaning
under low furniture. Lower
handle by stepping on either
pedal at rear of cleaner.
When putting the handle into the
upright position, two clicks may
be heard. This is a normal
design characteristic of your
cleaner and can be expected.
Operate your cleaner at normal
power by pushing the switch to
the ON position. To turn
cleaner off, push switch back to
the OFF position.
Normal power is to be used for
regular cleaning of carpet and
rugs and when using cleaning
Your cleaner also has a
'POWER SURGE' feature for
extra cleaning power on heavily
soiled carpet. To use this
feature slide switch to the right
as far as possible and hold it in
that position. When released, it
will return to the ON position.
7
UPRIGHT
OPERATING