JBL ONBEAT AIR Owner's Manual page 19

bv HARMAN
IF THE WI-FI CONNECTION WAS UNSUCCESSFUL
If the JBL OnBeat Air was unable to connect to your Wi-Fi network, its Status LED will
change to flashing amber.
If this happens:
a) Press the JBL OnBeat Air's Power button to turn the unit off.
b) Wait 10 seconds, then press the Power button again to turn the unit back on.
c) Repeat Steps 3 - 5 to connect to your Wi-Fi network.
- HARMAN Consumer, Inc.
V h 8500 Balboa Boulevard, Northridge, CA 91329 USA
© 2011 HARMAN International Industries, Incorporated. All rights reserved.
JBL is a trademark of HARMAN International Industries, Incorporated, registered in the
United States and/or other countries.
JBL OnBeat is a trademark of HARMAN International Industries, Incorporated.
iPhone, iPod, iPod touch, iPad, AirPlay, iTunes and Mac are trademarks of Apple Inc.,
registered in the U.S. and other countries. iPod, iPhone and iPad not included. "Made
for iPod," "Made for iPhone" and "Made for iPad" mean that an electronic accessory
has been designed to connect specifically to iPod or iPhone or iPad, respectively, and
has been certified by the developer to meet Apple performance standards. Apple is not
responsible for the operation of this device or its compliance with safety and regu latory
standards.
Wi-Fi is a registered trademark of the Wi-Fi Alliance.
Features, specifications and appearance are subject to change without notice.