Powering On The Hg532E; Setting Network Access Parameters; Logging In To The Web-Based Configuration Utility - Huawei HG532e User Manual

1.2 Powering On the HG532e

After connecting the cables, press the On/Off button on the side panel to power
on the HG532e.
The ADSL indicator lights up and starts blinking. This indicates that the
asymmetric digital subscriber line (ADSL) port activation is in progress. The
blinking may last from 40 seconds to 3 minutes. When the ADSL indicator stops
blinking and remains on, indicates that the HG532e is working correctly.
To power off the HG532e, press the On/Off button on the side
panel, and then unplug the power adapter.

2 Setting Network Access Parameters

2.1 Logging In to the Web-based Configuration
Utility
Most parameters of the HG532e are preset before delivery to meet common
application scenarios at home. To check the HG532e's working status or to
configure certain advanced network functions, use the web-based configuration
utility.
To log in to the web-based configuration utility:
Step 1 Launch a browser on your computer. Enter http://192.168.1.1 in the
address box, and press Enter.
Step 2 On the login page, enter your user name and password.
By default, both the user name and password are user.

For security reasons or to make the user name and password easy

to remember, you can change them. For details, see section 4.1
"Changing the User Name and Password for the Web-based
Configuration Utility".
Step 3 Click Login.
After verification, the web-based configuration utility is displayed.
2