Settings
Use compression
— Select if compression is used.
•
Registration
— Select the registration mode.
•
Use security
— Select if security negotiation is used.
•
Proxy server
— Enter the proxy server settings for this SIP
•
profile.
Registrar server
— Enter the registration server settings
•
for this SIP profile.
Edit SIP proxy servers
Select
Options
New SIP profile
>
Proxy servers are intermediate servers between a browsing
service and its users used by some service providers. These
servers may provide additional security and speed up access
to the service.
Select from the following:
Proxy server address
•
address of the proxy server in use.
Realm
— Enter the proxy server realm.
•
User name
and
Password
•
password for the proxy server.
Allow loose routing
•
Transport type
— Select UDP, Auto, or TCP.
•
Port
— Enter the port number of the proxy server.
•
Edit registration servers
Select
Options
New SIP profile
>
server.
132
or
Edit
Proxy
>
— Enter the host name or IP
— Enter your user name and
— Select if loose routing is allowed.
or
Edit
Registrar
>
Select from the following:
Registrar server address
•
address of the registrar server in use.
Realm
— Enter the registrar server realm.
•
User name
•
password for the registrar server.
Transport type
•
Port
— Enter the port number of the registrar server.
•
Net call settings
server.
Select
Menu
Internet
tel..
To create a new net call profile, select
profile.
To edit an existing profile, select
Configuration settings
Select
Menu
Configurations.
You can receive messages from your service provider or
company information management containing
configuration settings for trusted servers. These settings are
automatically saved in Configurations. You may receive
configuration settings for access points, multimedia, or e-
mail services, and IM or synchronisation settings from trusted
servers.
— Enter the host name or IP
and
Password
— Enter your user name and
— Select UDP, Auto, or TCP.
Tools
Settings
>
>
>
Options
Tools
Settings
>
>
>
© 2008 Nokia. All rights reserved.
Connection
>
Options
New
>
> Edit.
Connection
>