Specifications - Rigol PA1000 Series User Manual

RIGOL

Specifications

All specifications listed in the table below can be met under
following two conditions unless where noted:
The instrument has been continuously operated for 30 minutes

at the stated temperature.
All the specifications are guaranteed except for the one marked

"typical".
Signal Input
Input Impedance
Internal Bias
(equivalent at the
output terminals)
External Input
Amplifier
Working Mode
Gain
Polarity Switching
Virtual Value of Sine
Output Power
(RL=7.5Ω)
Output Voltage
Output Current
Output Impedance
Full Power
Bandwidth
5-4
50kΩ
+/-12V
+/-10Vmax (Gain: X1)
+/-1.25Vmax (Gain: X10)
Constant Voltage
Switching in 10V/1V and 10V/10V (DC
Gain error: <5%)
Normal/Invert
10W (typical, input: Sine, 100kHz, X10)
12.5Vpeak (output: Sine, 100kHz)
1.65Apeak (input: Sine, 100kHz)
<2Ω
[Remark1]
DC~1MHz
User's Guide for PA1000 Series Power Amplifier
Characteristics and Specifications