RIGOL
Rear Panel
USB Device Power In
1. Power In
Please plug with AC (12V, 4A) using the power cord provided in
the accessories.
CAUTION
!
Do not use any other adapters to supply power for the
PA1011, or else it may cause degradation or perpetual
damage.
2. USB Device
Connect the PA1011 to PC with the USB data cable.
CAUTION
!
Please make sure the vents at both sides and the fan
aperture at the rear panel are visible in operation for
normal working.
1-4
Figure 1-2 View of Rear Panel
User's Guide for PA1000 Series Power Amplifier
Fan Louvre
Quick Start