Table of Contents
Advertisement
RIGOL
Installation
The PA1011 Power Amplifier consists of two components: the
control software and the instrument module. Please correctly
connect them together as following steps before use:
1. Software Installation
A CD disk contains Control Program is attached to the spare
parts of your new PA1011 Power Amplifier.
(1) If the Labview has already been installed in your computer,
please go to next step directly; if not, double click the file
lv82runtime.msi to install it.
(2) If the NI Visa library has already been installed, please go
to next step directly; if not, double click the file
NIVISAruntime.msi to install it.
(3) Right click the file PA1000.inf and select "Install" from
the pop-up menu.
(4) Run PA1000Control.exe directly after the device is well
connected. (see follows)
2. Power on
Plug with AC power using the power cord provided in the
accessories and turn on the instrument.
3. USB Connection and Driver Installation
Connect the instrument with computer using the USB data
cable provided in the accessories. A Hardware Wizard dialog
box will pop up to guide you to install the USB driver when
connection succeeds for the first time.
1-6
User's Guide for PA1000 Series Power Amplifier
Quick Start
Advertisement
Table of Contents
