Panasonic TY-TPEN2 Operating Instructions

Operating Instructions

Electronic Pen for Interactive Plasma Display
TY-TPEN2
Model No.
Before connecting, operating or adjusting this product,
English
please read these instructions completely.
Please keep this manual for future reference.
TQBC2744
Printed in Japan
M0413-0
FCC and IC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the Panasonic Service Center or an experienced radio/TV technician for help.
FCC Caution: To assure continued compliance, follow the attached installation
instructions and use only shielded interface cable when connecting to computer or
peripheral devices. Any changes or modifi cations not expressly approved by Panasonic
Corp. of North America could void the user's authority to operate this device.
Under Industry Canada regulations, this radio transmitter may only operate using
an antenna of a type and maximum (or lesser) gain approved for the transmitter by
Industry Canada. To reduce potential radio interference to other users, the antenna
type and its gain should be so chosen that the equivalent isotropically radiated power
(e.i.r.p.) is not more than that necessary for successful communication.
FCC Declaration of Conformity
Models: DKB-DP13
Responsible Party: Panasonic Corporation of North America
One Panasonic Way, Secaucus, NJ 07094
Contact Source: Panasonic System Communications
Company of North America
Panasonic North America 3 Panasonic Way
7D-6, Secaucus NJ 07094
Telephone:+1-855-772-8324
http://panasonic.com/business/fl at-panel-displays/
This device complies with Part 15 of the FCC Rules and all applicable IC RSS
standards. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Safety Precautions
Danger
About Prohibition of Heating
■ Do not put Electronic Pen in fi re, heat it or leave it in places that
can get hot.
■ Batteries must not be exposed to excessive heat such as sunshine,
fi re or the like.
Electronic Pen contains a lithium-ion polymer rechargeable battery, so
heating may result in combustion or rupture that may cause burns or fi re.
Warning
About Prohibition of Disassembly
■ Do not disassemble or modify the Electronic Pen.
When disposing of this product, disassemble properly by following the
"Disposal" procedure in the TH-50PB2 or TH-65PB2 series operating
instructions (Electronic Pen Operations) displayed by the following
URLs.
The operating instructions (Electronic Pen Operations) are also provided
in the CD-ROM included in the PB2 series Display.
http://panasonic.net/prodisplays/download/specsheets.html
About Charging
■ Use the included charging cable for charging.
Charging with other devices may result in battery leakage, heating or
rupture.
■ Do not use the included charging cable for uses other than
charging Electronic Pen.
Doing so may result in heating, combustion or damage.
About Electronic pen
■ Do not use near medical equipment.
(Do not bring into a surgery room, intensive care unit, critical care unit,
etc.)
Electromagnetic waves generated by this device can affect equipment,
and can cause equipment to malfunction.
■ Do not use near automatic doors, smoke detectors and other
automatically controlled equipment.
Electromagnetic waves generated by this device can affect equipment,
and can cause equipment to malfunction.
■ Use at least 22 cm (9 in.) away from pacemakers.
Electromagnetic waves generated by this device can affect the operation
of pacemakers.
■ Keep the optical attachment out of reach of children to prevent
swallowing.
• Please seek medical attention immediately if you suspect a child has
swallowed the optical attachment.
■ You must not aim the optical attachment lens at the Sun or an
intense light source, or look at the Sun or an intense light source
through the optical attachment lens. To do so may cause vision
loss. Never look at the Sun or other intense light sources through
the lens. Also, if you aim the lens at the Sun or an intense light
source, the lens could focus light to a fl ammable item and cause a
fi re.
Caution
■ Do not drop, exert pressure on, or step on the Electronic Pen.
Doing so may damage the Electronic Pen, which may result in injury.
■ Be careful of the tips of the Electronic Pen.
Accidentally inserting the tip of the Electronic Pen into the eye may
cause injury.
■ Always keep the Electronic Pen in a cool, dry place.
Failure to do so may cause fi re or electric shock.
Precautions
Any changes or modifi cations not expressly approved by the party
responsible for compliance could void the user's authority to operate this
device.
Other Information
Usage Note
Operating the electronic pen and the electronic pen adapter near
electrical appliances may cause interference. Move away from the
electrical appliances such as TVs, radios, cordless phone, or wireless
devices .
MEDICAL
Consult the manufacturer of any personal medical devices, such as
pacemakers, to determine if they are adequately shielded from external
RF (radio frequency) energy. (The unit operates in the frequency range
of 2.405 GHz to 2.480 GHz, and the power output level is 1 milliwatts.)
Do not use the unit in health care facilities if any regulations posted
in the area instruct you not to do so. Hospitals or health care facilities
may be using equipment that could be sensitive to external RF (radio
frequency) energy.
No responsibility will be taken by our company with respect
to consequences resulting from the use, damage or both of
the equipment.
Requests regarding handling
• Do not press on the pen tip and eraser tip of the electronic pen more
strongly than necessary.
• If there is surface contamination of the electronic pen, wipe it off
with a soft cloth.
For heavy contamination, wipe it off with a soft cloth dampened with a
mild soap solution after squeezing water out of the cloth, and then dry
the surface with a soft, dry cloth. Ingress of water droplets may cause a
failure.
• Do not drop the electronic pen or the optical attachment because it
may get broken or malfunction.
• Do not use the pen tip or eraser tip if foreign material is adhering to
it or if it is deformed or damaged.
Doing so may dirty or scratch the screen.
• Be careful not to hit or scratch with the pen tip of electronic pen
because it is protruding. Also note that the electronic pen will not
function correctly if the pen tip cannot receive the light from the
display.
• Do not use the electronic pen for other purposes than operating the
Interactive Plasma Display.
• Do not aim the optical attachment lens at the Sun or other intense
light sources. To do so may cause a malfunction.
• When optical attachment, detached from the electronic pen, is not
in use, keep it in such a manner as to prevent dust from entering
inside.
• Do not use optical attachment for any electronic pen other than the
supplied electronic pen.
• During inductive charging, please leave more than 20cm from the
charger.
Accessories Supplied
Check that all of the following items are included.
In the event that an item is missing, please contact your dealer.
Electronic pen (1) Charger cable (1)
Model No. DKB-DP13
Parts No. N2FZ00000025 K1HY05YY0098
Optical attachment (1)
TGAD003
Usage
For information on how to use or dispose of Electronic Pen, or how to use
the optical attachment, see the TH-50PB2 or TH-65PB2 series operating
instructions (Electronic Pen Operations) displayed by the following URLs.
The operating instructions (Electronic Pen Operations) are also provided
in the CD-ROM included in the PB2 series Display.
http://panasonic.net/prodisplays/download/specsheets.html