Cleaner Descriptions; How To Use; Product View; Handle Release Pedal - Hoover FloorMATE Hard Floor Cleaner Owner's Manual

2. How to use

2-1
1
3
4
9
16
13
14
15
The assembled cleaner will look like
this drawing.
1. Hand grip
2. Solution trigger: squeeze to
release clean solution.
3. Brush control switch: lowers
the brush assembly for wet clean-
ing or raises the brush assembly
for wet pickup and dry vacuum-
ing.
4. Clean solution tank release
5. Clean solution tank cap/
measuring cup
6. Clean solution tank
7. ON/OFF switch
8. Recovery tank lid and filter
9. Recovery tank release
10. Recovery tank: Collects dry
2-2

Handle Release Pedal

Step on pedal (A) to lower handle to
operating position. Handle does not
lock into a single position but "floats"
to allow convenient operation.
2
5
17
6
7
8
10
12
11
19
13
debris as well as dirty cleaning
solution.
11. Wet/Dry pedal: Press pedal to
change between wet and dry
cleaning.
12. Wet/Dry indicators: Shows
either wet or dry cleaning usage.
13. Nozzle release buttons:
Release nozzle for easy clean-up.
14. Nozzle
15. Squeegee
16. Handle release pedal
17. Cord hooks: Top hook rotates
for quick cord release.
18. Carrying handle
19. Soft-tread wheels
2-3
A
ON/OFF Switch
Push switch (B) up to turn cleaner on.
Push switch down to turn cleaner off.
18
16
This cleaner is intended for house-
hold use.
Operate cleaner only at voltage
specified on data plate on back of
cleaner.
Plug cleaner into a properly
grounded outlet.
2-4
B
To transport
To move your cleaner from room to
room, put handle in upright position;
tilt cleaner back on rear wheels and
push forward.
Continued
5