Setting Signals - Fujitsu Plasmavision P50XHA10US Service Manual

SETTING SIGNALS

This display can store parameter settings for eight additional signals for RGB.
To do this, select the desired signal and follow "RGB MODE ADJUSTMENT" in the manual to adjust the parameters.
When you finish, the settings will be automatically stored.
FACTORY SET SIGNALS (RGB MODE)
Main corresponding signals (RGB mode)
Display (dots x lines)
640 x 480
640 x 480
640 x 480
720 x 400
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768 1024 x 768
1280 x 1024
1280 x 1024
1600 x 1200
1600 x 1200
848 x 480
852 x 480
1360 x 768
720 x 485
720 x 575
* With some input signals, "Out of range" may appear even when the horizontal and vertical frequencies are within their permissible ranges. Make
sure that the vertical frequency of the input signal is 85 Hz or less for SVGA, 75 Hz or less for XVGA/ SXGA , 60 Hz or less for UXGA.
Horizontal frequency (kHz)
31.47
37.50
43.27
31.47
37.88
46.88
53.67
48.36
60.02
68.68
63.98
79.98
75.00
106.25
31.02
31.72
47.71
15.73
15.63
Vertical frequency (Hz)
59.94 VGA
75.00 VGA 75 Hz
85.01 VGA 85 Hz
70.09 400 lines
SVGA 60 Hz
60.32
75.00 SVGA 75 Hz
85.06 SVGA 85 Hz
60.00 XGA 60 Hz
75.03 XGA 75 Hz
84.99 XGA 85 Hz
60.02 SXGA 60 Hz
75.03 SXGA 75 Hz
60.00 UXGA 60 Hz
85.00 UXGA 85 Hz
60.00
59.97
60.01
59.94 60 fields
50.00 50 fields
- 5 -
Signal DVD-I