S-Video Input; Video - Fujitsu Plasmavision P50XHA10US Service Manual

Hide thumbs Also See for Plasmavision P50XHA10US:
Table of Contents

Advertisement

DVD PLAYER
Connect the video signal cable to either the component video terminal or the SCART terminal. (When the P-TE1000E is installed.)
Connect the video signal cable to the component video input terminal, S-video input terminal, or the
video input terminal. (When the P-TE1010E is installed.)
If the component to be connected is equipped with component video output terminal, it is recommended to connect to the
component video terminal.
To component video output
To audio output
To component video output
To video output
To S-video output
To audio output
To SCART output
To audio input
An example of the underside of the display
(with the P-TE1000E installed in the P42VHA10)
To audio input
To S-video input
An example of the underside of the display
(with the P-TE1010E installed in the P42VHA10)
- 13 -
To component
video input
To SCART input
To component
video input

Advertisement

Table of Contents
loading

Table of Contents