Frame Advance; Double Speed Playback; Shuttle Dial Operation - Toshiba W-704 Service Manual

Variable Speed Playback (continued)

Frame Advance

A picture advances frame by frame.
1
Press PLAY/x2 during still playback.
Each time you press PLAY/x2 , the picture
advances one frame.
If you press and hold PLAY/x2 , the tape runs
at 1/30th the normal playback speed.
To resume normal playback
Press PAUSE/STILL .
Note
If you playback a tape recorded in the SLP tape speed or a tape recorded on another VCR in various speed
mode, the picture may be noisy or monochrome.
2 2

Shuttle Dial Operation

You can also activate the picture search and slow playback at
various speeds by turning the shuttle dial on the VCR.
1
Turn the shuttle dial on the VCR.
The playback speeds differ depending on the recording tape speed of
the tape as follows.
Picture search
SP: x5 x7
SLP: x15 x21
Notes
• The still picture mode will be released automatically after about 5 minutes
and forward playback will start.
• Fast-forwarding or rewinding started from the stop mode continues even if
the shuttle dial is released. To stop, press STOP .
• The reverse playback mode will be released automatically after about 25
seconds and forward playback will start.
• Noise bar may appear in reverse playback.

Double Speed Playback

A tape runs at twice the normal speed.
1
Press PLAY/x2 during playback.
The picture runs at twice the normal playback
speed.
To resume normal playback
Press PLAY/x2 .
Initial mode of tape operation
Stop
Playback
Still
Reverse playback
-x1
-x3