Connections; Video Jack - Toshiba W-704 Service Manual

PREPARATION

Connections

Before you use this VCR, it is necessary to connect it to your TV. Several ways of connecting are
available depending on your use of TV or cable box. Select one which is applicable to your equipment.
Antenna/VCR/TV Connection
1
Disconnect the antenna cable from your TV and connect it to the RF IN terminal on the
VCR.
2
Connect the RF OUT terminal to the TV.
VHF/UHF combinaion
antenna
Setting the VCR Output Channel
When the VCR is connected in this way, the VCR sends the output
signals to channel 3 or 4 on your TV. Set the output channel
selector (CH selector) of the VCR to "3" or "4", whichever is vacant
in your area.
AUDIO/VIDEO Connections
The AUDIO/VIDEO jacks are also available to connect your TV.
LINE OUT VIDEO
LINE OUT AUDIO
1
IN
(FROM ANT.)
2
OUT
(TO TV)
When connected your TV using the
AUDIO/VIDEO OUT jacks
To watch video pictures, set the video input mode on
your TV. For the video input mode, refer to the
manual of your TV.
VIDEO IN
AUDIO IN
VHF antenna
only
Antenna splitter
(not supplied)
UHF antenna
only
VHF/UHF
VHF UHF
1 1