Erase The Recorded Tracks Page-10; Erase The Entire Song Page-10; Recording Mode: Overdub, Replace Page-10; Recording Using The Metronome Guide Page-10 - GEM Prp700 Owner's Manual

owners manual
Erase the recorded tracks
The piano sequencer enables you to erase a recorded track. Keep pressed for more than 2 sec. the
track button you wish to delete. The display shows CLR (clear). Press the BALANCE/DATA buttons
to confi rm.
Erase the entire song
Keep pressed for more than 2 sec. the REC button to delete the entire song memory. The display
shows RCA (Record Clear All), press the BALANCE/DATA buttons to confi rm the request.
Recording mode: overdub, replace
The piano sequencer features two recording modes: overdub and replace. In overdub mode the
new performance will be added to the existing song. In replace mode, the new song substitutes
the existing one. The two modes can be set separately for each track. (i.e: TRACK1 overdub mode,
TRACK2 replace mode or vice versa).
Keep pressed for more than 2 sec. the track button
where you want to modify the recording mode.
The fi rst menu parameter will appear, the display
shows:
Now press the SELECT/TEMPO buttons, to select
the recording mode menu.
Recording using the metronome guide
With the sequencer it is possible to record a song using a proper metronome guide. Set up the
metronome parameter as already explained in the previous chapter, TIME SIGNATURE, ACCENT,
VOLUME, SPEED. When these correspond to your needs, press the REC button on the control panel.
They will be automatically memorized in the sequencer.
NOTE: Once the TIME SIGNATURE parameter is stored in the sequencer it is not be possible to change the setting.
Page10
BALANCE
DATA
BALANCE
DATA
The display enters the new screen showing:
REPLACE
MODE
Now press the SELECT/TEMPO buttons again. The
display shows the current recording mode:
REPLACE
MODE
Press BALANCE/DATA buttons to select overdub
or replace mode.
BALANCE
OVERDUB
MODE
DATA
Prp700-Prp800
Display confi rm message
Display confi rm message
OVERDUB
MODE