Cleaning, Maintenance, And Lubrication - Chicago Electric 68221 User Manual

Maintenance and Servicing
Procedures not specifically explained
in this manual must be performed
only by a qualified technician.
TO PREVENT SERIOUS INJURY FROM
ACCIDENTAL OPERATION:
Turn the Power Switch of the tool off and unplug the
tool from its electrical outlet before performing any
inspection, maintenance, or cleaning procedures.
TO PREVENT SERIOUS INJURY FROM TOOL FAILURE:
Do not use damaged equipment. If abnormal
noise or vibration occurs, have the problem
corrected before further use.
Cleaning, Maintenance,
and Lubrication
1. BEFORE EACH USE, inspect the general condition of
the Chainsaw Sharpener. Check for loose hardware,
Page 10 For technical questions, please call 1-800-444-3353.
misalignment or binding of moving parts, cracked
or broken parts, damaged electrical wiring, and any
other condition that may affect its safe operation.
2. AFTER USE, wipe external surfaces of the tool
with clean cloth. Keep Chainsaw Sharpener
clean and free of dust, metal debris and dirt.
3. Check the Grinding Wheel before each use to
make sure it isn't damaged. Do not use a grinding
wheel if it is chipped, cracked or worn.
4. Check if the wheel has cracks not visible to the human
eye by hanging it up by the central hole and tapping it
with a non metal object (such as a screwdriver handle).
If it is in good condition, it will produce a metallic sound.
A dull sound indicates a crack or break in the wheel.
5. Replace the grinding wheel once it grinds
downs to a diameter of 3 inches.
6. WARNING! If the supply cord of this
power tool is damaged, it must be replaced
only by a qualified service technician.
SKU 68221