Operating Your Mixer - Jenn-Air Attrezzi JSM900 User Manual

Operating Your Mixer

1. Make sure the touch wheel control is SET TO
"OFF" and the mixer is unplugged.
2. Press the mixer head release button and LIFT
MIXER HEAD UP.
3. INSERT AN ATTACHMENT.
4. LOCK BOWL onto the bowl locking plate.
5. LOWER THE MIXER HEAD by pressing the mixer head release
button and guiding the mixer head down carefully with your
hands.
6. PLUG POWER CORD into 3-prong electrical outlet.
7. TURN TOUCH WHEEL CONTROL until desired setting is
illuminated.
8. PRESS "START/STOP" BUTTON in center of wheel. The mixer
will start gradually, to avoid spattering, and build up to the
selected speed.
9. To PAUSE, press the "start/stop" button again. The mixer will
stop. To restart at the same speed setting, simply press
"start/stop" again. The mixer will resume, ramping up to the
selected speed.
10. To CHANGE THE SPEED, simply turn the touch wheel control
until the desired setting is illuminated.
11. TO TURN MIXER OFF, turn the touch wheel control to "OFF".
Unplug the power cord from the electrical outlet.
12. REMOVE ATTACHMENTS by pressing them up as far as possible
and turning to the left to release. Pull from the attachment post.
To avoid risk of injury, be sure to press "stop" before scraping
the sides of the bowl. The bowl is designed to mix effectively
and require minimal scraping. Never attempt to scrape the
sides of the bowl while the mixer is operating.
WARNING
7