Jenn-Air Attrezzi JSM900 User Manual page 7

To attach the wire whip, flat beater or dough hook:
Injury hazard – Unplug mixer before inserting or removing
attachments. Failure to do so may result in broken bones or
cuts.
1. Make sure that the touch wheel control is set to
"OFF" and the mixer is unplugged.
2. Press the mixer head release button and lift the
mixer head up until it locks into place.
3. Insert desired attachment onto attachment post
and press upward as far as possible.
4. Turn the attachment to the right, hooking the
attachment to the post.
5. Be sure the bowl is attached to the mixer before operating (see
page 5).
6. Lower the mixer head by pressing the mixer head release button
and guiding the mixer head down carefully with your hands.
7. Plug power cord into a grounded 3-prong electical outlet.
WARNING
6