Assembling Your Mixer - Jenn-Air Attrezzi JSM900 User Manual

Assembling Your Mixer

Note
• Before first use, wash bowl and attachments in hot, soapy water.
Rinse and dry. The bowl and attachments are also dishwasher
safe.
To attach the bowl:
1. Make sure the touch wheel control is set to
"OFF" and the power cord is unplugged.
2. Press the mixer head release button and lift
the mixer head up until it locks into place.
3. Place bowl on the bowl locking plate and
turn clockwise until the bowl locks into
place.
4. Attach the dough hook, flat beater or wire whip to the mixer
attachment post (see page 6).
5. Lower the mixer head by pressing the mixer head release button
and guiding the mixer head down carefully with your hands.
6. Plug power cord into a grounded 3-prong electrical outlet. The
mixer is now ready to use.
Electrical Shock Hazard – Plug into grounded outlet. Do not
remove ground plug. Do not use an adapter. Failure to follow
these instructions can result in death or electrical shock.
To remove the bowl:
1. Make sure that the touch wheel control is set to "OFF" and the
power cord is unplugged.
2. Press the mixer head release button and lift the mixer head up
until it locks into place.
3. Turn the bowl counterclockwise to unlock and remove.
WARNING
5