pin is inserted at 6:00 AM for high temperature (comfort period); a blue pin is inserted at 10:00
PM for low temperature (energy saving period). Two additional sets of pins are located in the
program pin storage area. You can set up to six temperature changes with the pins supplied.
We recomment at least five hours for each energy saving period.
To change the pins add a new energy saving period.
To remove a pin, press against the program dial and pull the pin straight out. DO NOT attempt
to change a pin if it is engaged with the program index wheel.
On heating/cooling systems, be sure to reset the pins when the seasons change. You will also
probably want to change the lever positions.