Your Honeywell Trol-A-Temp
traced to the following.
Thermostat requires little or no attention. Most problems can be
—system switch. May be in OFF or
—fuse or circuit breaker.
—furnace power switch. May be Off. Move switch to ON.
—heating equipment for proper
—airflow at register. Zone damper
may be closed.
Move system switch to HEAT
If blown or tripped, replace fuse or
See manufacturer's instructions.
Turn Off power. Check for correct
terminal hookups. Repair any frayed
or broken wires. Firmly tighten all
If damper is closed, contact a
qualified service technician for