LG GSA-5163D Service Manual page 13

Installation
Connecting to computer
ON OFF
OR
NOTES
• Please do not turn off the drive while the computer is searching for the drive.
If you turn off the drive, normal operation of the computer will not be possible.
• Please do not connect the AC adapter and USB 2.0 converter cable by any means
other than specified above.
NOTES
• Make sure you have a personal
• You cannot use the FireWire
• Power for all device should be turn off
Connect the drive to the computer as
To AC wall
shown in figure.
outlet.
1. Connect the USB converter cable [or
2. Connect the other end of the USB
3. Connect the AC adapter plug to the
4. When the computer is ready, confirm
computer with an open USB port or
IEEE 1394 port before connecting the
drive to your computer.
[IEEE 1394] and USB interfaces
simultaneously.
before attaching the cables.
IEEE 1394 cable] to the External
Super Multi DVD Rewriter.
converter cable [or IEEE 1394 cable]
to your computer.
power connector at the rear of the
drive.
Attach the AC adapter to the AC wall
outlet.
that the drive is detected. And then,
insert the supplied software CD into
the External Super Multi DVD Rewriter
and install the software.
13