Emergency History - Sony DVP-CX850D Service Manual

### Mecha Aging ###
Press ENTER : Table Move
Press PLAY : Start
_
Abort: STOP Key
Pressing the ENTER key again starts moving the disc table and the
following display appears.
### Mecha Aging ###
Press ENTER : Table Move
Press PLAY : Start
Disc No. x_
Abort: STOP Key
Insert the discs in accordance with the instructions shown on the
display, to the position where disc location numbers have already
been input. Press the ENTER key each time after inserting a disc.
When all five discs are inserted, press the PLAY button to start the
mechanical aging.
### Mecha Aging ###
Count : x
Disc No.xxx
DVD DL 12cm
Abort: STOP Key
The number of times of aging (aging count), disc number and disc
type is displayed.
To stop the mechanical aging, press the STOP key. The following
message appears.
### Mecha Aging ###
Count :
Press ENTER : Table Move
Press RETURN : Exit
_
Pressing the ENTER key at this moment moves the disc table to
the disc number position that is shown on the display as follows.
### Mecha Aging ###
Count :
Disc No.xxx_
Press ENTER : Table Move
Press RETURN : Exit
_
Remove a disc and press the ENTER key. Remove all five discs in
turn.
Press the RETURN key to return to the Test Mode menu.

6-7. EMERGENCY HISTORY

### EMG. History ###
Laser Hours CD
DVD xxxxxxh
1. xx xx xx xx
xx xx xx xx
2. xx xx xx xx
xx xx xx xx
_
Select:1-9 Scroll:UP/DOWN
(1:Last EMG.) Exit:RETURN
On the Test Mode Menu screen, selecting 4 displays the
information such as servo emergency history. The history
information rom last 1 up to 10 can be scrolled with
key. Also, specific information can be displayed by directly entering
that number with ten keys.
The upper two lines display the laser ON total hours. Data below
minutes are omitted.
Clearing History Information
Clearing laser hours
Press DISPLAY and CLEAR keys in this order.
Both CD and DVD data are cleared.
Clearing emergency history
Press TITLE and CLEAR keys in this order.
Initializing set up data
Press DVD and CLEAR keys in this order.
The data have been initialized when "Set Up Initialized"
message is displayed. The EMG. History screen will be
restored soon.
6-10
x
x
xxxxxxh
xx xx xx xx
xx xx xx xx
xx xx xx xx
xx xx xx xx
key or