Sony CDP-D12 Specifications page 3

Cue-Point Marking
Operators can mark a cue-point to immediately
start playback from any desired point.
Various Playback/Repeat Modes
In addition to normal playback, shuffle playback,
and program playback modes, power-on play is
also available. For each playback mode, three
repeat modes are provided: single-track repeat,
A-B repeat, and all-track repeat.
Sequential Playback
Sequential playback is available when multiple
CDP-D12 players are daisy-chained through the
'Relay Play' input/output interfaces. When the
first CD player reaches its playback end, a
control signal is sent to the second player to
trigger its playback automatically.
Remote Control via RS-232C and
Parallel Ports
The CDP-D12 is equipped with both RS-232C
and parallel ports, which allow remote control
of the CDP-D12 from another control system,
such as an external PC. The mixer-fader-play
command is also available through the parallel
port.
RM-DS11 Remote
Control Unit (Supplied)
The supplied remote control unit allows simple
and quick playback control of the CDP-D12
player. Both wired and infrared wireless control
is possible. The wired control capability is useful
when the CDP-D12 player is installed with other
CD players, and it provides comfort that the CD
players are operating when putting an audio
program to air.
Shock-Resistant Design
For additional reliability, the CDP-D12 player
incorporates an ESP (Electronic Shock Protection)
function. Using a buffer memory with a
capacity of 2.6 seconds, this reduces unwanted
track 'skips' caused by external shocks or
vibrations.
Versatile Playback
The CDP-D12 player reads audio data stored on
CD-R or CD-RW discs as well as conventional
CDs. It also accepts both 8 cm and 12 cm CDs
without an adaptor.
RM-DS11