Honeywell TB7600 Integration Manual page 9

BACNET INTEGRATION MANUAL FOR TB7600 SERIES THERMOSTATS
Typical Graphical User Interface (GUI) Objects
The following objects should be typically used in a GUI:
• Room Temperature (AV7);
• Occupied and Unoccupied Heat Setpoints (AV 42 and AV44);
• Occupied and Unoccupied Cool Setpoints (AV 43 and AV45);
• Outdoor Temperature (AV9);
• Supply Temperature (AI16) (If available);
• Occupancy Command (MV12);
• Effective Occupancy (MV34);
• System Mode RTU (MV14) or System Mode HPU (MV13);
• G Fan (BI25);
• Y1 Cool (BI26);
• Y2 Cool (BI27);
• W1 Heat (BI28);
• W2 Heat (BI29) or Reversing Valve (BI30);
• Economizer Output (AV22) (if available);
• Aux (BI24);
• DI 1 Status (BI31);
• DI 2 Status (BI 32);
• Frost Alarm (BI36) (if available);
• Filter Alarm (BI38) (if available);
• Service Alarm (BI39) (if available);
• Fan Lock Alarm (BI40) (if available)
Fig. 7. Typical GUI for a TB7605B5014B with Economizer control.
9 63-4523—02