Advertisement
13. [34] Rotary encoder assembly / [35] Main cam / [36] Arm gear 1 assembly / [37] Centering arm assembly
29
( S2 )
<Note13a>
[ 34 ]
[ 37 ]
<Note13b>
( L18 )
Collar
<Note13c>
<Note13b>
[ 36 ]
Fig.4-5-13
30
( S2 )
( W1 )
[ 35 ]
<Note13b>
< Note 13a >:
How to attach the rotary encoder assembly [34].
[ 34 ]
Phase alignment
Align the phase of the main cam [ 35 ] ,then attach it by
placing the (red) coloured markings (on 2 gear teeth)
within the encircled area.
Fig.4-5-13a
< Note 13b >:
How to attach the main cam [35] .
Boss
Phase alignment
[ 35 ]
Boss
[ 37 ]
Phase alignment
Align the phases of the arm gear 1 assembly [ 36 ] and
centering arm assembly [ 37 ] ,then attach the arm gear 1
assembly [ 36 ] /centering arm assembly [ 37 ] by fitting the
bosses into the lower cam slot,and fit the slit washer.
Fig.4-5-13b
< Note 13c >:
How to remove the centering arm assembly[37] The center
arm assembly is located behind the mechanism assembly
when the phase is aligned correctly. The center arm assem-
bly can be removed by displacing it in the direction of the ar-
row.
[ 37 ]
Phase alignment
Fig.4-5-13c
Mark (colored : red)
[ 35 ]
[ 36 ]
Phase alignment
L18
(No.YD085)1-23
Advertisement
