Advertisement
9. [21] Ent. guide base assembly / [22] Worm wheel 2 / [23] Timing belt / [24] Center gear assembly
26
( S2 )
[ 21 ]
<Note9a>
[ 22 ]
Fig.4-5-9
10. [25] Reel drive pulley assembly / [26] Push plate/ [27] Clutch lock gear (2) / [28] Clutch lock gear (1)
Detail "A"
<Note10b>
Flange
[ 26 ]
( W1 )
<Note10a>
[ 27 ]
[ 28 ]
Fig.4-5-10
[ 23 ]
[ 24 ]
[ 23 ]
(P6)
[ 28 ]
( W1 )
( P6 )
[ 25 ]
"A"
< Note 9a >:
How to attach the worm wheel 2 [22] .
[ 22 ]
[ 34 ]
Align the phase of the rotary encoder assembly [34],
then attach it by aligning the phase hole of the
mechanism assembly.
Fig.4-5-9a
< Note 10a >:
After attaching (W1), confirm that pushes [26] from the top
and hit to MAIN DECK. If there are a rattling or inclination in
[26] , reconfirm the attachment of (P6). (Take care to the ob-
lique insertion of (P6).)
< Note 10b >:
Attach (P6) straight for it which does not get on on the flange
of [28]
Phase alignment
Mark (Red)
(No.YD085)1-21
Advertisement
